Connect+® 3000 / SendPro® P3000 Systems
Thickness Adjustment Knob
The thickness adjustment knob is located beneath the feeder cover. Turn this knob to adjust for the
thickness of the envelopes.
To set, turn the knob until the arrow on the knob lines up with the arrow to the right as shown below. The
arrow on the knob snaps into position.
Connect+® 500W / SendPro® P1500, Connect+® 1000 / SendPro® P1000 and Connect+®
2000 / SendPro® P2000 Systems
Getting started
Pitney Bowes Operator Guide February,2018 Page 26 of 349
To Next Page
Loading...
