Adding Addressed Admail to Your Mail Pieces
To qualify as Addressed Admail, your mailing must meet the following requirements:
l Be promotional in nature.
l Contain a uniform message.
l Include a minimum of 1,000 pieces to Canadian addresses.
l Meet address accuracy requirements (when mailing over 5,000 pieces).
l Be prepared and/or presorted in a specific way.
To set up Addressed Admail:
1. Select the Run Mail button in the Mailing tile on Home screen.
2. Select Class in the Mail Information list box on the Run Mail screen.
3. Select Addressed Admail.
4. Select the appropriate options (for example, Letter Carrier Presort then Delivery Facility, then
Short and Long).
5. Click OK.
6. The Run Mail screen re-displays showing the inscription on the envelope.
7. Load the envelope and select Start.
8. To save the job, select the Save As link at the top of the screen.
9. Type in the job name and select OK.
Return address
The return address is positioned at the left edge of the envelope.
The return address option allows you to type in a return address. If you use more than one return
address, save each address in a different job.
Running mail
Pitney Bowes Operator Guide February,2018 Page 96 of 349
To Next Page
Loading...
