Checking for rates and software updates
When you select the Rates and Updates button in the Mailing tile on the Home screen, the meter
checks for available updates and downloads them. The rates and updates button shows an
exclamation mark as a reminder that there are files waiting to be installed.
1. Select the Rates and Updates button in the Mailing tile on the Home screen. The meter checks
for updates and additional features. If updates are available, the meter begins the download and
displays the amount of time required to complete it.
2. Once the download is complete the Install updates dialog screen displays. You are prompted to
install updates.
3. A countdown message appears on the Install updates dialog screen beginning at 5:00 minutes.
The meter will automatically install the update when the countdown reaches 0:00 minutes
unless you select Install now or Install later.
l
Select Install now if you want to install the updates at this time. Follow the prompts to
complete the update installation.
l
Select Install later if you want to install the updates at another time. The system opens the
Rates and Updates Scheduler. You can use the scheduler to postpone the installation up to
4 times.
Setting the time to check for updates
Schedule the meter to check for software updates at a specific time every day.
1. Select Rates and Updates from the Home screen.
2. Select Updates Scheduler.
3. Set the time for your meter to check for updates. Select an update time that occurs when your
meter is inactive to prevent mail disruptions.
4. Select Done to return to the Home screen.
Performing the rate updates
The SendPro MailCenter meters update postal rates and software automatically.
Your meter checks for updates every day at a specific time.
Rates and Updates
Pitney Bowes User Guide April 2024 75
To Next Page
Loading...
