VIP User’s Manual
CLI Commands
108
net reset Reset the system
net set gateway Set default gateway’s IP address
net set http Turn on/off HTTP server
net set ip Set IP address
net set ip_preced Set IP precedence bits
net set mask Set IP subnet mask
net set speed Select Ethernet link speed
net set user_pw Set password
net show Display IP parameters
net show hwstat Display hardware status
ping Send ICMP echo request to another host
show h323 Display H.323 parameter settings
show version Show software versions
set h323 Set H.323 parameters
tel show
pcm_gain_level
Display gain level setting of the PCM codec’s receive chan-
nel.
tel show port Display hook state for a telephony port
tel show ring_freq Show ringer’s frequency
tel set pcm_gain_level
Set gain level for the PCM codec’s receive channel
tel set ring_freq Set ringer’s frequency
B.2 Download Mode Commands
Command Description
help Display help screen
quit Switch to normal operation mode
set gateway Set default gateway ‘s IP address
set ip Set IP address
net set mask Set IP subnet mask
start Start downloading file
To Next Page
Loading...
Need help?
General
