VIP User’s Manual
Command Line Interface
75
Database Update Control Commands
atpm done
The atpm done command ends the atpm table update session and re-enables the address transla-
tion.
Syntax description
This command has no arguments or keywords
atpm erase
The atpm erase command erases the dial plan database from the non-volatile memory.
Syntax description
This command has no arguments or keywords
atpm purge {all|addr|dest|hunt}
Use the atpm purge command to delete all entries from the atpm tables.
Syntax description
all
Delete all entries from atpm ddress, destination and hunt group ta-
bles.
addr
Delete all entries from atpm address table.
dest
Delete all entries from atpm destination table.
hunt
Delete all entries from atpm hunt group table.
atpm req
The atpm req command starts the atpm table update session. Upon starting the atpm table update
session, the ATPM address translation is disabled, hence no phone call can be made, until a atpm
done command is issued.
Syntax description
This command has no arguments or keywords
atpm restore
The atpm restore command restores the whole dial plan from non-volatile storage to the atpm ad-
dress, destination and hung group tables.
Syntax description
This command has no arguments or keywords
To Next Page
Loading...
Need help?
General
