VIP User’s Manual
Command Line Interface
79
This command has no arguments or keywords
Example
ITG>atpm hlist
Group id Type #Members Member ids
-------------------------------------------------------------------
1 2 1 1
2 2 1 2
3 2 1 3
4 2 1 4
5 2 1 5
6 2 1 6
7 2 1 7
8 2 1 8
11 2 1 11
OK
ITG>
Address Table Management Commands
atpm aadd tel# min_digits max_digits hunt_group_id prefix_strip_len [prefix#]
Use the atpm aadd command to add an entry into the atpm address table.
Syntax description
tel#
Telephone number to match. This is only part of the total dialed
string.
min_digits
Minimum number of digits to be collected before the ATPM starting
matching the dialed string with entries in the address table.
max_digits
Maximum number of digits to be collected before the ATPM start-
ing matching the dialed string with entries in the address table.
hunt_group_id
Hung group ID for this telephone number
pre-
fix_strip_len
The number of digits to be stripped at the beginning of the col-
lected dial string before forwarding the string to the destination.
prefix#
(Optional) Digit to be added before the beginning of the collected
dial string before forwarding it to the destination.
atpm adel tel#
The atpm adel command deletes an entry from the atpm address table.
Syntax description
tel#
Number of a previously added entry to be deleted from the atpm ad-
dress table.
To Next Page
Loading...
Need help?
General
