VIP User’s Manual
Worksheets
112
D.2 ATPM Destination Table
Local Destinations
Each telephony ports of VIP must be assigned a unique destination ID. Fill out the worksheet for
local destinations by designating each port a unique destination ID, then use the CLI command
atpm dadd dest_id port port# for each entry in the worksheet to add it to the destination ta-
ble. The dest_id in the command corresponds to the Destination ID in the worksheet, while the
port# corresponds to the Port#. You may alternatively use the web browser to add local destina-
tions to the destination table.
Port# Mode Destination ID
0 port
1 port
2 port
3 port
4 port
5 port
6 port
7 port
To Next Page
Loading...
Need help?
General
