Specification Class Value
Solid contaminants Class 3 - filter grade for solids Better than 5 μm
Water content Class 4 - maximum pressure
dew point
+3 °C (+37 °F)
Total oil content Class 3 - maximum oil content
1 mg / m
3
Noise emission
NOTE
The noise pressure level may vary depending on the material and milling
parameters.
Specification Certificate Value
Noise level Milling in plastic < 70 dB (A)
Type plate
21 Technical information
User's manual Planmeca PlanMill 60 S 93
To Next Page
Loading...
