Chapter A - GENERAL & TECHNICAL DATA
A-2 Planmeca Proline XC X-ray unit
MANUAL VERSIONS
Technical Manual
2MANUAL VERSIONS
PLANMECA pursues a policy of continuous product development. Although every effort is
made to produce up-to-date product documentation this manual should not be regarded as an
infallible guide to current production specifications. Planmeca reserves the right to make
changes to specifications without prior notice.
NOTE PLEASE NOTE THAT THIS TECHNICAL MANUAL IS VALID FOR SOFTWARE REVI-
SIONS: FILM X-RAY UNITS PK 6.50 AND PG 6.50 OR LATER, DIGITAL X-RAY UNITS PK
5.50 AND PG 5.50 OR LATER). If you find that your X-ray unit doesn’t have some key-
board functions, or its keyboard functions differs from procedures described in this
manual, then either the software must be replaced with at least the above mentioned
revision, or you have to relate to an older version of this manual. The former procedure
is recommended.
To Next Page
Loading...
Need help?
General
