Chapter B - GRAPHIC USER INTERFACE
Planmeca Proline XC X-ray unit B-9
SERVICE SETTINGS
Technical Manual
The service settings mode is password protected and the password is asked when the
Serv-
ice settings
mode is entered for the first time after switching the unit on.
The password is
1701.
The list of service settings appear. By touching the arrow down field below the list you can
see more features. Touch the arrow up field to return to the previous display
CAUTION Some of the functions in the service settings mode may be fatal to the unit’s proper
operation. Never use service settings functions if you are not familiar with how they
operate.
To exit the service settings mode touch OK on the selected service settings mode display.
To Next Page
Loading...
