Need help?Do you have a question about the Planmeca Viso and is the answer not in the manual?
General| Software | Planmeca Romexis |
|---|---|
| X-ray tube voltage | 60-120 kV |
| Focal Spot Size | 0.5 mm |
| Category | Dental equipment |
| Imaging Modes | CBCT, Panoramic, Cephalometric |
| Patient Positioning | Standing, sitting |
| Imaging Modalities | CBCT, Panoramic, Cephalometric |
| X-ray tube current | 1 mA - 10 mA |
| Exposure Time Range | Varies depending on imaging mode and settings |
| Image Receptor Size | Varies depending on mode |
| Power Supply | 230 V AC |
| Sensor Type | Flat panel sensor |
To Next Page
