Pleiger Elektronik
GmbH & Co. KG
Edition: 6/2007 Subject to modifications Manual for 362MC Page: 13
Parameter Value (min Meaning Comment
1
st
Controller max)
1SpTypA1SpTypA
1SpTypA1SpTypA
1SpTypA
fixedfixed
fixedfixed
fixed Setp. type A = fixed value See also Functional extension
extern extern
extern extern
extern = external input Setpoint programme (Appendix C3)
1Setp A1Setp A
1Setp A1Setp A
1Setp A
0.0°C 0.0°C
0.0°C 0.0°C
0.0°C Setpoint A for type A=fixed Setpoint here e.g. 0-200°C; see also
200.0°C200.0°C
200.0°C200.0°C
200.0°C extern for type A=extern Explanatory note on setpoints (5.3.1)
1SpTypB1SpTypB
1SpTypB1SpTypB
1SpTypB
fixedfixed
fixedfixed
fixed Setp. type B = fixed value The second setpoint, B, is only
extern extern
extern extern
extern = external input active when an external switching
1Setp B1Setp B
1Setp B1Setp B
1Setp B
0.0°C 0.0°C
0.0°C 0.0°C
0.0°C Setpoint B for type B=fixed input has been parameterised for
200.0°C200.0°C
200.0°C200.0°C
200.0°C extern for type B=extern 2Setp in the Input menu.
1T-Lowp1T-Lowp
1T-Lowp1T-Lowp
1T-Lowp
0.0s 0.0s
0.0s 0.0s
0.0s Low pass filter time See also Explanatory note on
999.9s 999.9s
999.9s 999.9s
999.9s for setpoint switching switching filter (5.3.2)
1Alarm-1Alarm-
1Alarm-1Alarm-
1Alarm-
-99.0°C-99.0°C
-99.0°C-99.0°C
-99.0°C Alarm limit= Setp.-abs.value 1Alarm- Lower alarm limit (ActVal < Setp)
0.0°C 0.0°C
0.0°C 0.0°C
0.0°C Alarm OFF See also Explanatory note on
200.0°C200.0°C
200.0°C200.0°C
200.0°C Alarm limit= 1Alarm- limit value alarm (5.3.3)
1Alarm+1Alarm+
1Alarm+1Alarm+
1Alarm+
-99.0°C-99.0°C
-99.0°C-99.0°C
-99.0°C Alarm limit= Setp.+abs.value 1Alarm+ Upper alarm limit (ActVal > Setp)
0.0°C 0.0°C
0.0°C 0.0°C
0.0°C Alarm OFF See also Explanatory note on
200.0°C200.0°C
200.0°C200.0°C
200.0°C Alarm limit= 1Alarm+ limit value alarm (5.3.3)
Parameter The following parameters for the 2
nd
controller are displayed only when
2
nd
Controller 2 controllers are selected in the Profile menu.
2SpTypA2SpTypA
2SpTypA2SpTypA
2SpTypA
fixedfixed
fixedfixed
fixed Setp. type A = fixed value See also Functional extension
extern extern
extern extern
extern = external input Setpoint programme (Appendix C3)
2Setp A2Setp A
2Setp A2Setp A
2Setp A
0.0°C 0.0°C
0.0°C 0.0°C
0.0°C Setpoint A for type A=fixed Setpoint here e.g. 0-200°C; see also
200.0°C200.0°C
200.0°C200.0°C
200.0°C extern for type A=extern Explan. note on setpoints (5.3.1)
2SpTypB2SpTypB
2SpTypB2SpTypB
2SpTypB
fixedfixed
fixedfixed
fixed Setp. type B = fixed value The second setpoint, B, is only
extern extern
extern extern
extern = external input active when an external switching
2Setp B2Setp B
2Setp B2Setp B
2Setp B
0.0°C 0.0°C
0.0°C 0.0°C
0.0°C Setpoint B for type B=fixed input has been parameterised for
200.0°C200.0°C
200.0°C200.0°C
200.0°C extern for type B=extern 2Setp in the Input menu.
2T-Lowp2T-Lowp
2T-Lowp2T-Lowp
2T-Lowp
0.0s 0.0s
0.0s 0.0s
0.0s Low pass filter time See also Explanatory note on
999.9s 999.9s
999.9s 999.9s
999.9s for setpoint switching switching filter (5.3.2)
2Alarm-2Alarm-
2Alarm-2Alarm-
2Alarm-
-99.0°C-99.0°C
-99.0°C-99.0°C
-99.0°C Alarm limit= Setp.-abs.value 2Alarm- Lower alarm limit (ActVal < Setp)
0.0°C 0.0°C
0.0°C 0.0°C
0.0°C Alarm OFF See also Explanatory note on
200.0°C200.0°C
200.0°C200.0°C
200.0°C Alarm limit= 2Alarm- limit value alarm (5.3.3)
2Alarm+2Alarm+
2Alarm+2Alarm+
2Alarm+
-99.0°C-99.0°C
-99.0°C-99.0°C
-99.0°C Alarm limit= Setp.+abs.value 2Alarm+ Upper alarm limit (ActVal > Setp)
0.0°C 0.0°C
0.0°C 0.0°C
0.0°C Alarm OFF See also Explanatory note on
200.0°C200.0°C
200.0°C200.0°C
200.0°C Alarm limit= 2Alarm+ limit value alarm (5.3.3)
5.3 Setpoint menu
In addition to the described setpoint entry function (3.1.1), the setpoint types, SetpTyp,
and the filter times, T-Lowp, can be parameterised here in the commissioning menu.
In case of the special version 0-500°C the maximum values for the temperature are
changed to 500°C instead of 200°C.
""
""
"
Negative values for the alarm parameters relate to system deviations
(relative to the setpoint); positive values for the alarm parameters relate
to fixed alarm limits; alarm parameter = 0 = limit monitoring OFF.
""
""
"
""
""
"
We urgently recommend you to alter the parameters marked with the
symbol
in the tables belonging to this description in “Manual” mode only. This will avoid
unintentional activation of the actuator.