Point Grey Flea3 GigE - Page 5

Point Grey Flea3 GigE Technical Reference
7.1.7 Low Smear Trigger (Mode 13) 46
7.1.8 Overlapped Exposure Readout Trigger (Mode 14) 47
7.1.9 Multi-Shot Trigger (Mode 15) 48
7.2 External Trigger Timing 49
7.3 Camera Behavior Between Triggers 49
7.4 Changing Video Modes While Triggering 50
7.5 Asynchronous Software Triggering 51
8 Flea3 GigE Attributes 52
8.1 Pixel Formats 52
8.1.1 Raw 52
8.1.2 Mono 52
8.1.3 RGB 52
8.1.4 YUV 52
8.2 Video Modes Overview 54
8.2.1 Video Mode Descriptions 55
8.3 GenICam Image Format Control 57
8.4 Frame Rates 58
8.4.1 Calculating Maximum Possible Frame Rate 58
8.4.2 FL3-GE-03S2 Video Modes and Frame Rates 59
8.4.3 FL3-GE-08S2 Video Modes and Frame Rates 60
8.4.4 FL3-GE-13S2 Video Modes and Frame Rates 61
8.4.5 FL3-GE-14S3 Video Modes and Frame Rates 62
8.4.6 FL3-GE-20S4 Video Modes and Frame Rates 63
8.4.7 FL3-GE-28S4 Video Modes and Frame Rates 65
8.4.8 FL3-GE-50S5 Video Modes and Frame Rates 67
8.5 Shutter Type 69
8.5.1 Global Shutter 69
8.6 Overview of Imaging Parameters 70
8.7 GenICam Analog Control 71
8.8 Brightness 72
8.9 Shutter Time 72
8.10 Gain 73
8.11 Auto Exposure 74
8.12 Sharpness 75
8.13 Gamma and Lookup Table 75
8.14 High Dynamic Range (HDR) Imaging 77
8.15 Image Flip/Mirror 77
8.16 Embedded Image Information 77
8.17 White Balance 79
Revised 10/29/2013
Copyright ©2010-2013 Point Grey Research Inc.