Point Grey Flea3 GigE - Flea3 GigE Installation Guide

Point Grey Flea3 GigE Technical Reference
8.18 Bayer Color Processing 80
8.19 Hue 81
8.20 Saturation 81
9 Troubleshooting 82
9.1 Support 82
9.2 Camera Diagnostics 83
9.3 Status Indicator LED 84
9.4 Test Pattern 84
9.5 Channel Balancing 85
9.6 Blemish Pixel Artifacts 86
9.6.1 Pixel Defect Correction 86
9.7 Vertical Smear Artifact 87
9.7.1 Smear Reduction 87
A FlyCapture API Code Samples 88
A.1 Setting a GPIOPin to Strobe Using the FlyCapture API 88
A.2 Setting a Standard Video Mode, Format and Frame Rate Using the FlyCapture API 88
A.3 Asynchronous Hardware Triggering Using the FlyCapture API 88
A.4 Setting Brightness Using the FlyCapture API 89
A.5 Setting Shutter Using the FlyCapture API 89
A.6 Setting Gain Using the FlyCapture API 89
A.7 Setting Auto Exposure Using the FlyCapture API 90
A.8 Setting Sharpness Using the FlyCapture API 90
A.9 Setting Gamma Using the FlyCapture API 90
A.10 Setting White Balance Using the FlyCapture API 91
A.11 Accessing Raw Bayer Data using FlyCapture 91
A.12 Setting Hue Using the FlyCapture API 91
A.13 Setting Saturation Using the FlyCapture API 92
B FlyCapture SDK Examples 93
B.1 AsyncTriggerEx 93
B.2 BusEventsEx 93
B.3 CustomImageEx 93
B.4 ExtendedShutterEx 94
B.5 FlyCap2CameraControl 94
B.6 FlyCap2_GTKmm 94
B.7 FlyCap2MFC 95
B.8 FlyCapture2GUI 95
B.9 FlyCapture2SimpleGUI_WPF 95
B.10 FlyCapture2Test 95
B.11 GigEGrabEx 96
Revised 10/29/2013
Copyright ©2010-2013 Point Grey Research Inc.