Point Grey Flea3 GigE - Installing Interface Card and Software

Point Grey Flea3 GigE Technical Reference
B.12 GrabCallbackEx 96
B.13 HighDynamicRangeEx 96
B.14 ImageEventEx 96
B.15 MultipleCameraEx 98
B.16 MultipleCameraWriteToDiskEx 98
B.17 MultiSyncEx 98
B.18 SaveImageToAviEx 98
B.19 SaveImageToFlashEx 98
B.20 SerialPortEx 99
C GenICam Features 100
C.1 Device Control 100
C.2 Analog Control 100
C.3 Image Format Control 101
C.4 Acquisition Control 102
C.5 Digital Input Output Control 103
C.6 Transport Layer Control 104
C.7 User Set Control 108
C.8 Chunk Data Control 108
D GigE Vision Bootstrap Registers 109
E Control and Status Registers 111
E.1 IMAGE_RETRANSMIT: 634h 111
E.2 DATA_FLASH_CTRL: 1240h 112
E.3 DATA_FLASH_DATA: 1244h 112
E.4 GPIO_CTRL_PIN: 1110h-1140h 113
E.5 GPIO_XTRA_PIN: 1114h-1144h 114
E.6 TRIGGER_MODE: 830h 114
E.7 PIXEL_CLOCK_FREQ: 1AF0h 115
E.8 AE_ROI: 1A70 – 1A74h 115
E.9 LUT: 80000h – 80048h 116
E.10 FRAME_INFO: 12F8h 118
E.11 INITIALIZE: 000h 119
E.12 TIME_FROM_INITIALIZE: 12E0h 119
E.13 LINK_UP_TIME: 12E4h 119
E.14 XMIT_FAILURE: 12FCh 120
E.15 VMODE_ERROR_STATUS: 628h 120
E.16 CAMERA_LOG: 1D00 – 1DFFh 120
E.17 LED_CTRL: 1A14h 120
E.18 PIXEL_DEFECT_CTRL: 1A60h 121
Revision History 122
Revised 10/29/2013
Copyright ©2010-2013 Point Grey Research Inc.