Poly Polycom RealPresence Group Series User Manual

Accept a Call during a Call
When you receive an incoming call during a call, you can choose to place the current call on hold or hang
up the current call and answer the incoming call.
Procedure
» Do one of the following:
• Select Hold + Accept.
• Select Hang Up + Accept.
Ignore a Call
If the Polycom RealPresence Group Series system does not answer incoming calls automatically, you can
choose to ignore the call rather than answer it.
Procedure
» Using your remote control, select Ignore or press .
Hold a Call
In a point-to-point call, you can place a call on hold, and then answer an incoming call, make an outgoing
call, or switch between two calls.
Procedure
» Press Home on the remote control, then select Active Call > Hold.
When a call is on hold, On hold displays on the screen for 5 seconds. After 5 seconds, the hold
icon displays and remains on the screen until all calls are resumed or disconnected.
Hold a Call and Place a Call
You can place your current call on hold and place a call to another contact.
Procedure
1. Press on the remote control.
2. Place the call using your preferred method.
Calling
15

Poly Polycom RealPresence Group Series Specifications

General

Brand	Poly
Model	Polycom RealPresence Group Series
Category	Conference System
Language	English