Poly Polycom RealPresence Group Series User Manual

• If the codes match, the call is secure. Proceed with the call.
• If the codes do not match, the call might be compromised. Hang up the call and contact your
system administrator.
Change the Call Security Level
When enabled by your administrator, visual security classification works for SIP calls in a BroadSoft
environment.
When enabled by your system administrator, a visual security classification indicator displays during a call
to help participants be aware of the maximum level of classified information they can safely exchange in a
conversation. After a call begins, the visual security classification indication of the call displays on all
endpoint monitors in the call. During a call, you can override the security classification and assign a lower
security classification level. While you can change the security level, you cannot raise it higher than the
default setting.
Procedure
1. In the local interface, navigate to Call > Security.
2. From the Security Classification list, select the desired security level.
3. Click Continue to confirm your selection. After the security classification is raised or lowered, a
message displays for five seconds to all video participants. The change is only applicable to the
current call.
Settings
40

Poly Polycom RealPresence Group Series Specifications

General

Brand	Poly
Model	Polycom RealPresence Group Series
Category	Conference System
Language	English