Using a Polycom RealPresence Group
Series Remote Control
Topics:
▪ Remote Control Buttons and Descriptions
▪ Recharge the Remote Control Battery
▪ Wake the System
The infrared RealPresence Group Series remote control enables you to operate a RealPresence Group
Series system. This includes placing calls, adjusting the volume, controlling the camera, navigating
screens, and more. RealPresence Group Series systems and Polycom
®
EagleEye
™
cameras and camera
systems have infrared receivers that enable you to control the system by pointing the remote control
toward the system or a connected EagleEye camera or camera system.
Note: If you have an SDI camera, you might need a special cable to connect the camera to the system
to receive infrared signals from the remote control. For more information about the cable, contact
Polycom support.
7