Settings
Topics:
▪ Video Adjustments
▪ Audio Adjustments
▪ Cameras
▪ Call Answering Settings
▪ Encryption and Security
Before or during calls, you can adjust audio and video settings, including adjusting the volume, muting the
microphone, turning off the camera, and changing the video layout.
Depending on how the system is set up by your administrator, you might be able to customize user and
administrator settings on the system, including the language, time zone, LAN settings, and security
settings. If you have any questions about changing these settings, contact your administrator.
Video Adjustments
You can manage video and certain user interface settings.
Switch Between Full-Screen Video and the Home Screen
When your call connects, the system automatically shows video in full screen view. You can switch back
to the Home screen during a call if, for example, you need to adjust a user setting and your system is
configured to allow you to do so.
Procedure
1. Press on the remote control to go to the Home screen.
2. Press on the remote control to see the full screen.
Configure Automatic Self View Control
If your administrator has allowed you access to set Automatic Self View Control, you can configure this
setting so that other users can display or hide the Self View window.
Procedure
1. From the Home screen, press .
2. Navigate to Settings > User Settings > Camera.
3. Select the Automatic Self View Control checkbox.
Adjust for Room Lighting
If your administrator allows access to User Settings, you can adjust the brightness of the video sent to
your system using Backlight Compensation. Use Backlight Compensation in situations where the subject
30
To Next Page
Loading...
Need help?
General
