Polycom SoundStation IP 5000 User Manual

1 - 5
If your phone is not part of a large phone deployment, your phone may not be
registered after you set it up. Before you use your phone, you or your system
administrator will have to register it.
For detailed information on how to register your phone after you install it, see
Quick Tip 44011: Register Standalone SoundPoint IP, SoundStation IP, and Polycom
VVX 1500 Phones, available at http://www.polycom.com/usa/en/support/
voice/soundpoint_ip/VoIP_Technical_Bulletins_pub.html
Before You Use Your Phone
Before you use your phone, familiarize yourself with the phone’s features, the
icons that display on the screen, and how to navigate menus and enter data.
Features of the Phone
The following figure shows the primary hardware features of your phone
console.
Note
Since you can customize your phone in many different ways, and your system
administrator can enable and disable certain features, the user interface that
displays on your phone may differ from the figures that appear in this guide.
1
2
3

Polycom SoundStation IP 5000 Specifications

General

Frequency range	250 - 7000 Hz
Power over Ethernet (PoE)	Yes
Compliance industry standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN (RJ-45) ports	1
Power consumption (typical)	19 W
Operating temperature (T-T)	5 - 40 °C
Harmonized System (HS) code	85258900

Weight and Dimensions

Weight	520 g
Dimensions (WxDxH)	265 x 285 x 65 mm