Polycom SoundStation IP 5000 User Manual

3 - 14
Using Do Not Disturb
To prevent your phone from ringing, activate the Do Not Disturb feature.
Calls you receive while Do Not Disturb is enabled will display in your
Missed Calls Call List (see Using Call Lists on page 2-9). If you have chosen to
forward your calls to another number, calls will be sent to that number if Do
Not Disturb is enabled.
To enable and disable Do Not Disturb:
1. Press , and then select Features.
The Features screen displays. If Do Not Disturb is not highlighted, scroll
to it.
2. To toggle Do Not Disturb on or off, press the Select soft key.
When you enable Do Not Disturb, a flashing icon, , displays at the
top left of the screen. When you disable Do Not Disturb, the registered line
icon, , displays instead.
3. Press to return to the idle screen.
If you enabled Do Not Disturb, the idle screen displays a flashing icon, ,
next to the directory number.
Returning the Last Call
Last Call Return (LCR) enables you to automatically call back the last
incoming call without having to dial the number.
To call back the last incoming call:
• Press the New Call soft key, then the LCR soft key.
• You can also press , then select Features > Last Call Return.
Using the Auto Attendant
To access the Auto Attendant:
1. Dial 444.
2. Follow Auto Attendant voice prompts.

Polycom SoundStation IP 5000 Specifications

General

Frequency range	250 - 7000 Hz
Power over Ethernet (PoE)	Yes
Compliance industry standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN (RJ-45) ports	1
Power consumption (typical)	19 W
Operating temperature (T-T)	5 - 40 °C
Harmonized System (HS) code	85258900

Weight and Dimensions

Weight	520 g
Dimensions (WxDxH)	265 x 285 x 65 mm