Polycom SoundStation IP 5000 User Manual

2 - 1
2
Customizing Your Phone
You can customize your SoundStation IP 5000 conference phone by adjusting
certain settings, including language, volume, time and date, display contrast,
backlight intensity, and ring type. You can also add contacts to the phone’s
local Contact Directory.
This chapter shows you how to customize your phone. It includes the
following topics:
• Configuring Basic Settings on page 2-1
• Adjusting the Speaker and Ringer Volume on page 2-8
• Using Call Lists on page 2-9
• Managing Contacts on page 2-11
• Managing Incoming Calls on page 2-19
Some customizations, including shared lines and viewing a
Corporate Directory, must be set up by your system administrator.
To learn about your phone’s features, see Chapter 3, Using the Features of
Your Phone.
For more information or assistance with your new phone, see your system
administrator.
Configuring Basic Settings
To configure basic phone settings, press , and then select
Settings > Basic to view the basic phone settings you can customize.
This section includes the following topics:
• Updating Preferences
• Updating the Display Contrast
• Updating the Backlight Intensity

Polycom SoundStation IP 5000 Specifications

General

Frequency range	250 - 7000 Hz
Power over Ethernet (PoE)	Yes
Compliance industry standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN (RJ-45) ports	1
Power consumption (typical)	19 W
Operating temperature (T-T)	5 - 40 °C
Harmonized System (HS) code	85258900

Weight and Dimensions

Weight	520 g
Dimensions (WxDxH)	265 x 285 x 65 mm