3 - 7
The Active:Conference screen displays.
Setting Up a Conference with an Active Call and a Call on Hold
If you are currently in an active call, and you have another call on hold, you
can create a conference call between the active call, the call on hold, and
yourself, by pressing the Join soft key.
To set up a conference call with an active call and a call on hold:
>>
If you have an active call and a call on hold, scroll to either call, and then
press the Join soft key.
The Active:Conference screen displays.
A conference is created with the active call, the call on hold, and yourself.
Holding and Resuming Conferences
When you place a conference call on hold, you place all other conference
participants on hold.
To place a conference call on hold:
>>
From the Active:Conference screen, press the Hold soft key.
Note
If configured for single key-press conferences, you do not have to press the
Confrnc soft key again.
To Next Page
Loading...
