Polycom SoundStation IP 5000 User Manual

3 - 4
To answer a call on a shared line:
1. Answer the incoming call.
2. Press the Hold soft key.
Anyone on another phone configured to use the same shared line can take the
call by selecting the call on their phone screen.
Ending Active Calls
To end a call:
>> Press or the End Call soft key.
Muting the Microphone
To mute the microphone:
>> During a call, press .
The three console LEDs glow red to indicate that the other party (or parties)
cannot hear you. You can still hear all other parties while Mute is enabled.
To turn off the Mute feature, press again.
Redialing Numbers
You can redial the last number you dialed, or search a list of placed calls to find
a previously-dialed number.
Note
To ignore Incoming calls, press the Reject soft key (for private lines) or the
Silence soft key (for shared lines). To prevent your phone from ringing, enable the
Do Not Disturb feature (see Using Do Not Disturb on page 3-14).
You can forward incoming calls by pressing the Forward soft key (see
Forwarding Calls Dynamically on page 3-13).
If you set up your phone with a silent ring, press the Answer soft key to answer the
call.
Note
You cannot end a call that is on hold until you resume the call. To end a call on hold,
press the Resume soft key, and then end the call.

Polycom SoundStation IP 5000 Specifications

General

Frequency range	250 - 7000 Hz
Power over Ethernet (PoE)	Yes
Compliance industry standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN (RJ-45) ports	1
Power consumption (typical)	19 W
Operating temperature (T-T)	5 - 40 °C
Harmonized System (HS) code	85258900

Weight and Dimensions

Weight	520 g
Dimensions (WxDxH)	265 x 285 x 65 mm