Polycom SoundStation IP 5000 User Manual

2 - 6
If you do not press any keys on the phone, after 20 seconds of the backlight
turning on, the backlight dims (or changes) to medium in the following cases:
• A call is in progress
• A call is on hold
• There is an incoming call (ringing)
• There is an outgoing call (ringing back)
• Any menu shows on the display
In all other cases, the Backlight Idle intensity applies.
To change the backlight intensity:
1. Press , and then select Settings > Basic > Backlight Intensity.
The Backlight Intensity screen displays.
2. Select Backlight On Intensity.
The Backlight On Intensity screen displays.
3. Scroll to the intensity you want, and then press the Select soft key. The
default Backlight On Intensity is High.
4. If you selected a new intensity, press the Save soft key. If you did not
select a new intensity, press the Back soft key.

Polycom SoundStation IP 5000 Specifications

General

Frequency range	250 - 7000 Hz
Power over Ethernet (PoE)	Yes
Compliance industry standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN (RJ-45) ports	1
Power consumption (typical)	19 W
Operating temperature (T-T)	5 - 40 °C
Harmonized System (HS) code	85258900

Weight and Dimensions

Weight	520 g
Dimensions (WxDxH)	265 x 285 x 65 mm