Command Protocol Reference Guide
A - 61
pstn_out_gain
PSTN Output Gain
Description
This parameter sets the gain (in dB) of the signal going to the PSTN interface.
voip_answer
Answer an Incoming Call
Description
This parameter is used to answer an incoming call while the SoundStructure
VoIP Interface is currently in a different call.
voip_blind
Specify a Blind Transfer
Argument Argument value
Channel Type Virtual Channel
Value Type Floating-Point
Read/Write Mode Read/Write
Phys Chans Analog Telephony Output
Virt Chans Mono
System Limits Minimum: -20.0, Maximum: 20.0, Resolution: 0.5
Default 0.0
User Limits
Supported
No
Event Source No
Argument Argument value
Channel Type Virtual Channel
Value Type Void
Read/Write Mode Write-Only
Phys Chans VoIP Telephony Output
Virt Chans Mono
Event Source No
Argument Argument value
Channel Type Virtual Channel
Value Type Void
Read/Write Mode Write-Only