Command Protocol Reference Guide
A - 145
ir_key_press
Key Pressed On IR Remote
Description
When queried, this parameter returns the keycode value of the last key that
was pressed on the IR remote. As an event, a status message is generated
whenever a key is pressed on the IR remote.
ir_key_held
Key Held On IR Remote
Description
When queried, this parameter returns the keycode value of the last key that
was held on the IR remote. As an event, a status message is generated at an
interval of approximately 100 ms whenever an key is held on the IR remote.
Argument Argument value
Channel Type Virtual Channel
Value Type Integer
Read/Write Mode Read-Only
Phys Chans Infrared Remote Input
Virt Chans Control
System Limits Minimum: 0, Maximum: 255
Event Source No
Argument Argument value
Channel Type Virtual Channel
Value Type Integer
Read/Write Mode Read/Write
Phys Chans Infrared Remote Input
Virt Chans Control
System Limits Minimum: 0, Maximum: 255
Event Source No