Polycom SpectraLink 8400 Series Wireless Handset
96 May, 2011 | 1725-36720-001_RevA
Using the Quad Charger
The Quad Charger (DCA40), shown next, is designed to charge four Battery Packs simultaneously. You
can mount it on a horizontal or vertical surface.
The Battery Pack snaps into the charging slot. The LED just above the charging slot indicates the charging
status of the Battery Pack. The following table lists the LED indications and charger status.
Table 6: Quad Charger LED Indications
LED Indication Quad Charger Status
Blinking Charging
Solid green Fully charged
Off Not properly seated or empty
Using the USB Charger
The USB Charger (SA106B-05), shown next, plugs into the USB port on the side of the handset, and the
transformer plugs into a 110v outlet. The Status Bar on the handset’s’s screen indicates the Battery
Pack’s charging status.
To Next Page
Loading...
Need help?
General
