Polycom SpectraLink 8400 Series Wireless Handset
54 May, 2011 | 1725-36720-001_RevA
To play PTT broadcasts when Accept While Busy is disabled:
1 Highlight the active call in the Session Manager and press the Hold soft key to place the active call
on hold, or press the End key to end the active call.
2 Select the PTT cell in the Session Manager and press the Resume soft key to play the PTT
broadcast on hold.
Configuring PTT
There are several ways to configure PTT. You can change the PTT default channel, subscribe or
unsubscribe to channels that the system administrator has enabled, and customize incoming PTT alerts.
Changing the Default PTT Channel
The default PTT channel is displayed when you press and release the Talk button. The default channel
can be changed to any available channel.
To change the default PTT channel:
1 Navigate to Settings > Basic Settings > Preferences > Paging/PTT Configuration > PTT Push to
Talk.
2 Select Default Channel.
3 Enter the new default channel number and press the OK soft key.
4 Press Home or End to exit.
Subscribing and Unsubscribing to Channels
You can subscribe or unsubscribe to any channel that the system administrator has enabled. Enabled
channels will display in the PTT Channels List.
To subscribe or unsubscribe to PTT channels:
1 Navigate to Settings > Basic Settings > Preferences > Paging/PTT Configuration > PTT Push To
Talk.
The PTT Channel Configuration screen displays.
2 Highlight and select Channel Subscriptions.
The Channel Subscriptions screen displays.
3 Select a channel.
4 Enable your subscription to that channel by choosing Yes or disable your subscription to that
channel by choosing No.
5 Press the Home key to exit.
To Next Page
Loading...
Need help?
General
