Push-to-Talk (PTT) and Paging
May, 2011 | 1725-36720-001_RevA 59
Paging Configuration
There are several ways to change the paging configuration. You can change the default paging group,
and subscribe/unsubscribe to paging groups.
Changing the Default Paging Group
By default, Group 1 is the default page group but your system administrator may set a different default
group. If necessary, you can change the default group.
To change the default paging group:
1 Navigate to Settings > Basic Settings > Preferences > Paging/PTT Configuration > Group Paging.
The Group Paging Configuration screen displays and Default Group is highlighted.
2 Press the Ok key. A text entry box displays.
3 Type the number of the new default paging group.
4 Press the Ok soft key.
Changing Your Subscription to a Page Group
In order to receive a page from a particular group, you must subscribe to that group. By default, you are
subscribed to groups 1, 24, and 25. Contact your system administrator for information about who is in
each group.
To subscribe or unsubscribe to a page group:
1 Navigate to Settings > Basic Settings > Preferences > Paging/PTT Configuration > Group Paging.
The Group Paging Configuration screen displays.
2 Highlight and select Group Subscriptions.
The Group Subscriptions screen displays.
3 Select a group. Enable your subscription to that channel by choosing Yes or disable your
subscription to that channel by choosing No.
4 Press the Home key to exit
To adjust the volume of non-Emergency group pages:
• Use the side buttons to adjust the volume during a non-Emergency group page.
You cannot adjust the volume of Emergency group pages using the handset volume
control buttons. Setting the Emergency page volume is an administrator function. By
default, Emergency pages are played at the highest volume level.
To Next Page
Loading...
Need help?
General
