Polycom SpectraLink 8400 Series Wireless Handset
28 May, 2011 | 1725-36720-001_RevA
To call from a call list:
1 Scroll to the Contacts/Call Lists icon on the Home screen and press OK.
2 Highlight Call Lists and Press OK or press 3. Your call list opens.
3 Scroll to the contact you wish to call and press the Start key. For more information, see Using Call
Lists.
To call from the speed dial list:
• To place a speed dial call from the Home screen press the Favorites soft key. This opens a list of
your speed dial contacts.
You can select a name from the speed dial menu or use the keypad to press a speed-dial index
number. The call is placed immediately.
To call by entering a SIP address:
1 Press any number key on the keypad to open the Dialer. Note that phone numbers and URL
addresses are limited to number characters.
The Dial mode soft key displays.
2 Press the Dial mode soft key, select URL, and press OK.
The Dialer displays an Enter URL field with the prefix sip: .
2 Enter the SIP address you want to dial and press Enter.
To abort an outgoing call while it is ringing, press the End key.
To Next Page
Loading...
Need help?
General
