Using Telephony Applications
May, 2011 | 1725-36720-001_RevA 33
To answer an incoming call by ending the current call:
1 While in an active call, press the Ignore soft key to open the Session Manager.
2 Press End to end the current call.
3 Press the Start key to answer the incoming call.
To end an active call:
• Press End to end or hang up an active call.
To reject an incoming call:
• Press End. The ended call will be sent to voicemail if set up in your facility. You can also forward
calls to another number. To set up automatic call forwarding, see Forwarding Calls.
To silence the call alert:
• Press the Ignore soft key to silence the ring. The call will display in the Session Manager until it
stops ringing. You can have unanswered calls automatically forwarded to voicemail. To set up call
forwarding, see Forwarding Calls.
To send an incoming call immediately to voicemail:
• Press End. If voicemail is set up in your facility, the ended call will be sent immediately to
voicemail. See Accessing Voicemail.
To forward an incoming call to another number:
• Press the Forward soft key. You can have incoming calls automatically forwarded to voicemail. To
set up call forwarding, see Forwarding Calls.
To divert an incoming call:
• You can divert calls from specified contacts to another number. See To enable Auto Divert in
Chapter 6.
To Next Page
Loading...
Need help?
General
