Polycom Vortex EF2211 - LID - Assign Action for When Logic Input Is Deactivated

S01LIA4,MUTEI11
Assign the command
MUTEI11 to occur when
logic input pin 4 changes
from the inactive to active
state. The MUTEI11
mutes input channel 1
S01LIA4,MUTEI11
S01LIA5,MACROX23
Assign the command
MACROX23 to occur when
logic input pin 5 changes
from the inactive state to
the active state. The
MACROX23 command
executes macro 23, which
can contain up to 256
other commands.
S01LIA5,MACROX23
S01LIA6,BROADA:S02MUTEI11
Assign the command
BROADA:S02MUTEI11 to
occur when logic input pin
6 changes from the
inactive state to the active
state. This command
causes the EF2211 at ID 2
to mute its input channel
1 when logic pin 6 on the
EF2211 at ID 1 changes
from the inactive to active
state.
S01LIA6,BROADA:S02MUTEI11
S01LIA7,
Assign a blank command
to occur when logic input
pin 7 changes from the
inactive state to the active
state. Assigning a blank
command means no
action will take place as a
result of this state
change.
S01LIA7,
S01LIA4,?
Query the command
associated with the active
state of logic pin 4.
S01LIA4,<string> , where
<string> is the command string that
will be executed when logic input 4 is
activated. If this query was given after
the example for logic input 4 above,
the response would be
S01LIA4,MUTEI11 .
8.77. LID -- Assign Action for when Logic Input is
Deactivated