Change the Default Channel
When you press and hold Talk, your broadcast automatically transmits on the default channel 1. You can
change your default channel to any other channel. When you change the default channel, you are
automatically subscribed to the channel you selected.
Procedure
1. Navigate to Settings > Basic > Preferences > Paging/PTT Configuration.
2. Select PTT Push to Talk > Default Channel and select the number of the channel you want to
use.
Update Channel Subscriptions
You can subscribe to any channel that has been enabled by your system administrator and appears in
your channels list.
When you subscribe to a channel, you can send and receive PTT broadcasts on that channel.
Procedure
1. Navigate to Settings > Basic > Preferences > Paging/PTT Configuration.
2. Select PTT Push to Talk > Channel Subscriptions.
3. From the Channel Subscriptions screen, select the channel you want to subscribe to and select
Yes.
Enable PTT Broadcasts to Play During Active Calls
The Accept While Busy setting determines what happens when you are in a call and receive a PTT
broadcast. The setting is disabled by default, and when disabled, your phone does not play broadcasts
while you are in a call but holds them in a ending state instead. When you enable the Accept While Busy
setting, a PTT broadcast interrupts active calls and you hear the audio of the call and the broadcast.
Procedure
1. Navigate to Settings > Basic > Preferences > Paging/PTT Configuration.
2. Select PTT Push to Talk > Accept While Busy and select Enable.
Accessing, Sending, and Broadcasting Messages
Polycom, Inc. 100
To Next Page
Loading...
