End an Active Audio Call
You can end an active call on your phone at any time.
Procedure
1. Do one of the following:
• Place the handset on the cradle.
• Press End Call.
• In the Calls screen, highlight the call and press End Call.
End a Held Call
You cannot end calls that are on hold. You must resume held calls before ending them.
Procedure
1. From the Calls screen, select the held call and press Resume > End Call.
Transferring Calls
You can transfer active or held calls to another person using the following transfer types:
• Blind transfer—Transfers the call directly to another line without speaking with the other party first.
• Consultative transfer—Enables you to speak with the other party before completing the transfer.
Choose a Default Transfer Type
You can choose a default transfer type to use for all calls on VVX business IP phones.
When you choose a default transfer type, the phone uses the selected transfer type for all calls.
Consultative is the default transfer type.
Procedure
1. Navigate to Settings > Basic > Preferences.
2. Select Default Transfer Type and choose a transfer type.
The selected transfer type is used for all calls.
Transfer a Call
You can transfer a call to another contact and choose the transfer type you want to use for the call.
Procedure
1. During a call, do one of the following
• Press Transfer to use the default transfer type.
• Press and hold Transfer to use the non-default transfer type.
For example, if Blind is the default, press and hold Transfer to perform a Consultative
transfer.
Audio Calls
Polycom, Inc. 39
To Next Page
Loading...
Need help?
General
