Polytec PSV-500 User Manual

3-8
3 First Steps
8 Lock with key in the front flap
Front flap is lockable
Back view The back view of the PC is shown in . The order of the plug-in boards may
vary from that shown in the figure.
Figure 3.6: Back view of the PC
1 Cooling fan
2 Identification label
On the identification label you will find, among other things, the serial number of
the instrument.
3 Instrument warning label
On the instrument warning label you will find technical data for the fuses and the
mains connection.
4 Monitor connection (HDMI jack)
Connection is not used!
5 Monitor connection (15-pin Sub-D jack)
Connection is not used!
6 IEEE-1394 interfaces (FireWire-plug)
7 CONTROL network connection (marked in yellow)
Connection for the yellow network cable from the front-end to control the system
via the software and to transmit data
8 Connector for a cable shielding (blade connector)
Connection for the shielding line of the ACQ HM acquisition cable
I
O
13
22
1721
20 19 16 15 13
14
12
13
11
9
18
10
KEYBOARD
MOUSE
CONTROLVIDEO
ACQUISITION
Ck
D0
Trg
Ch0
D1
GENERATOR
CK
MONITOR
8
7
65
4
3
2
1

Polytec PSV-500 Specifications

General

Brand	Polytec
Model	PSV-500
Category	Measuring Instruments
Language	English