Polytec PSV-500 User Manual

7-1
7 Technical Specifications
7 Technical Specifications
7.1 Harmonized Standards Applied
CAUTION!
Impairment caused by radio interference! This device is subjected to Limit Class A and
can cause radio interferences in residential areas. In this case, the user has to carry out
appropriate measures.
7.2 PSV-F-500-HM Front-End
7.2.1 General Data
Mains Connection
Ambient Conditions
Laser safety: IEC/EN 60825-1:2008-05
(Safety of Laser Products, complies to US 21 CFR
1040.10 and 1040.11 except for deviations pursuant
to Laser Notice no. 50, dated 24 June 2007)
Electrical safety: IEC/EN 61010-1:2011-07
(Safety requirements for electrical equipment for
measurement, control, and laboratory use)
EMC: IEC/ EN 61326-1:2006-10
(EMC requirements on Emission and Immunity -
Electrical equipment for measurement, control, and
laboratory use)
Emission: Limit Class A
IEC/ EN 61000-3-2 and 61000-3-3
Immunity: IEC/ EN 61000-4-2 to 61000-4-6
and IEC/EN 61000-4-11
Mains voltage: 100…240VAC ± 10 %, 50 / 60 Hz
Power consumption: 200VA
Fuses: 3.15A/slow-blow
Protection class: 1 (protective grounding)
Operating temperature: +5°C…+40°C (41°F…104°F)
Storage temperature: − 10°C…+65°C (14°F …149°F)
Relative humidity: max. 80%, non-condensing

Polytec PSV-500 Specifications

General

Brand	Polytec
Model	PSV-500
Category	Measuring Instruments
Language	English