Polytec PSV-500 - PSV-I-500 Scanning Head Controls and Connections

3-11
3 First Steps
3.3.4 PSV-I-500 Scanning Head
Front view The front view of the scanning head is shown in the following figure.
Figure 3.8: Front view of the scanning head
1 Mounting thread for the PSV-A-410 close-up unit (not for PSV-3D) or for the
PSV-A-525 protective window
2 Front lens of the video camera with M37 mounting thread for the filters and
lenses (only PSV-I-500)
Camera control via the software
3 Laser beam aperture
Positioning and focusing the laser beam via the software
4 Beam shutter
Covering the laser beam aperture and the lens of the video camera
5 Fitting holes to fix the PSV-A-410 close-up unit (not for PSV-3D)
1
2
4
1
3
5
5