1-3
1 Safety Information
1.2.2 Safety Precautions
Pay attention to the following safety precautions when using the instrument:
•
Only qualified and fully trained persons should be entrusted with setting
up the instrument, adjusting and operating it!
•
Avoid looking directly into the laser beam with the naked eye or with the
aid of mirrors or optical instruments!
•
Wear suitable laser adjustment eyewear when you have to look at the
target area of the laser beam long and hard to set it up!
•
Never intentionally direct the laser beam at anyone!
•
Do not use any reflective tools, watches etc. when you are working in the
beam path of the laser!
•
Avoid staying in the scanning area! The laser beam can exit the scanning
head in an angle of ± 25°!
•
Always close the beam shutter, before positioning the scanning head. The
beam shutter should not be opened until the scanning head has been
roughly aligned and mounted securely!
•
The laser beam should be terminated at the end of its intended path
where this is practically possible.
•
Instruments which are not in use should be stored in places which
unauthorized persons do not have access to.
To Next Page
Loading...
