Polytec PSV-500 User Manual

i
Index
Numerics
10-32 UNF-2B, connection on the scanning
head
3-12
A
ACQUISITION, connector on the PC 3-9
air circulation 3-2
ambient conditions
controller specifications
7-1
general information 3-2
junction box (specifications) 7-8
PC (specifications) 7-7
scanning head (specifications) 7-9
applied, standards
declaration of conformity
C-1
area of application 2-1
assembly
conditions, scanning head
3-2
micro scan lenses A-12
scanning head on PSV-A-T11 A-3
system cabinet 3-17
warning label for assembly, on the scanning
head
3-13
AUX IN
jack on the front-end
3-4
specifications 7-2
AUX OUT
jack on the front-end
3-4
specifications 7-3
B
beam shutter
on the scanning head
3-11
use 5-1
block filter
PSV-A-445, on the zoom lens
A-23
PSV-A-HNeBF A-8
C
cabling
acoustic gate unit
A-8
compensation sensor 3-23
external scanner control A-29
external trigger 3-24 , 3-25
function generator (H system) 3-25
function generator (M system) 3-24
main components 3-20
mains connection 3-26
operating conditions 3-2
pan-tilt head A-6
reference signal 3-25
reference signal (M system) 3-24
test stand A-17
calibration interval, recommended 7-2
Ch0, jack on the junction box 3-6
cleaning
housing
3-3
scanning head 3-3
close-up unit
assembly
A-9
introduction A-8
mounting thread, on the scanning head 3-11
specifications A-10
CoherenceOptimizer, stand-off distances 4-7
complaint 3-2
configuration, optical B-2
configuration, PC 7-7
CONTROL
network connection on the front-end
3-5
network connection on the PC 3-8
control elements
front-end, back view
3-5
front-end, front view 3-4
junction box, back view 3-6
junction box, front view 3-6
PC (back view) 3-8
PC, front view 3-7
scanning head, back view 3-12
scanning head, bottom view 3-13
scanning head, front view 3-11
video camera with standard lens A-21
video camera with zoom lens A-22
cooling
scanning head
3-2
system components 3-2

Polytec PSV-500 Specifications

General

Brand	Polytec
Model	PSV-500
Category	Measuring Instruments
Language	English