Polytec PSV-500 User Manual

7-9
7 Technical Specifications
SIGNAL
SYNC
7.5 PSV-I-500 Scanning Head
7.5.1 General Data
Laser
Electrical Data
Ambient Conditions
Output voltage: max. ±10V at high-impedance load
max. ±5V into 50Ω
Output current: max. ±100mA
Output impedance: 50 Ω
Short-circuit protection: permanently short-circuit proof
Compatibility: TTL/CMOS
Output voltage HIGH: min. 4.35V (I
out
= 3.5mA)
Output voltage LOW: max. 0.4V (I
out
= 5mA)
Laser type: Helium-neon
Wavelength: 633nm
Cavity length: 204mm ±1mm
Laser class: 2
Laser power: < 1 mW
Power consumption: approx. 45W (average value)
Carrier frequency: 40MHz
Operating temperature: + 5°C…+ 35°C (41°F…95°F) without limitations
+ 35°C…+ 40°C (95°F…104°F) with limitations refer
to
SECTION 3.2, cooling scanning head
Storage temperature: − 10°C…+ 65°C (14°F…149°F)
Operating altitude: max. 3048m (max. 10000ft)
Relative humidity: max. 80%, non-condensing

Polytec PSV-500 Specifications

General

Brand	Polytec
Model	PSV-500
Category	Measuring Instruments
Language	English