3-14
3 First Steps
3.4 Assembly
CAUTION!
Damage caused by improper unpacking ! Unpack the system cabinet and perform the
subsequent assembly only in twos. For a single person, it is difficult to handle the
components of the system cabinet safely.
CAUTION!
Damage caused by heat accumulation ! Always keep the air inlets and outlets free. The
distance to the wall must be at least 50mm ! Provide sufficient free space under the
instrument as air vents are located there!
NOTE!
Before starting to assemble the instrument, make sure that all system components are in
perfect condition ! Check the devices for external damages such as scratches or the like. In
the case of a wrong delivery, damage or missing parts, please inform your local Polytec
representative immediately, stating the serial number of the devices.
NOTE!
Keep the assembly instructions for all components in a safe place.
To Next Page
Loading...
Need help?
General
