ii
D
D0, jack on the junction box 3-6
data acquisition (specifications)
H system
7-7
M system 7-8
declaration of conformity C-1
decoder (specifications) 7-3
displacement acquisition, theory B-1
disposal 1-1
DV-04
introduction
2-3
metrological properties 7-3
E
electrical safety
safety precautions
1-5
standards applied 7-1
EMC, standards applied 7-1
emission, EMC standards 7-1
EU countries, laser warning labels 1-4
F
fault diagnosis
general test
6-1
problems with the laser 6-2
problems with the measurement signal 6-3
procedure 6-1
fitting holes for close-up unit, on the scanning
head
3-11
front lens, on the scanning head 3-11
front-end
control elements (back view)
3-5
control elements (front view) 3-4
signal inputs and outputs (specifications) 7-2
specifications 7-1
functional test, carry out 3-26
G
general test, fault diagnosis 6-1
GENERATOR
SMB jacks on the PC
3-9
generator board, on the PC 3-10
geometry scan unit
functional test
A-2
introduction A-1
specifications A-2
technical specifications A-2
H
housing
cleaning
3-3
front-end (specifications) 7-2
industrial PC (specifications) 7-7
junction box (specifications) 7-8
pan-tilt head, specifications A-7
scanning head (specifications) 7-10
I
identification label
on the front-end
3-5
on the PC 3-8
on the scanning head 3-12
IEPE, LEDs on the front-end 3-4
immunity, EMC standards 7-1
inspection of the instruments 3-2
installation
additional/other components
3-3
assembly 3-14
cabling 3-20
instrument warning label, on the PC 3-8
J
junction box
control element (front view)
3-6
control elements (back view) 3-6
signal inputs and outputs (specifications) 7-8
specifications 7-8
L
label
identification label (front-end)
3-5
identification label (PC) 3-8
identification label (scanning head) 3-12
instrument warning label (PC) 3-8
laser warning labels 1-4
warning label for assembly (scanning
head)
3-13
laser (specifications) 7-9
laser activity, indicate 5-2
laser beam aperture, on the scanning head 3-11
laser beam, block 5-1
laser class of the device 1-2
LASER LED
on the scanning head
3-12
operating principle 5-2
laser safety
safety information
1-2
safety precautions 1-3
standards applied 7-1
laser warning labels
labels
1-4
position, scanning head 1-4
To Next Page
Loading...
