Polytec PSV-500 - Page 107

iii
M
mains connection
on the front-end
3-5
on the PC 3-9
operating conditions 3-3
specifications 7-1 , 7-7
mains switch
on the front-end
3-5
on the PC 3-9
measure
select measurement range
4-2
set stand-off distance 4-5
start the system 4-1
suitable settings 4-2
Measures, electrical safety 1-5
metrological properties, DV-04 7-3
micro scan lenses
operate
A-12
specifications A-13
mounting threads
for adapter plate
3-13
for quick release plate 3-13
N
notes about the manual 1-1
O
opening the instruments 3-3
operating temperature
controller specifications
7-1
PC (specifications) 7-7
scanning head (specifications) 7-9
optical configuration B-2
optics (specifications) 7-12
optimal stand-off distances 4-6
OPTION
jack on the scanning head
3-12
pin configuration A-29
P
pan-tilt head
align the scanning head
A-7
assembly A-3
cabling A-6
housing, specifications A-7
setting up the scanning head A-7
specifications A-7
PC
configuration (specifications)
7-7
control elements (back view) 3-8
control elements, front view 3-7
specifications 7-7
pin configuration, external scanner control A-29
POWER, LED on the front-end 3-5
precautions
electrical safety
1-5
laser safety 1-3
problems
with the laser (fault diagnosis)
6-2
with the measurement signal (fault
diagnosis)
6-3
procedure for fault diagnosis 6-1
protective window
assembly
A-28
introduction A-27
mounting thread on the scanning head 3-11
specifications A-28
R
REF
jacks on the front-end
3-4
jacks on the junction box 3-6
specifications 7-2
return information 3-2
S
safety
disposal
1-1
intended use 1-1
qualification 1-1
safety precautions, electrical 1-5
safety information
electrical safety
1-5
laser safety 1-2
safety precautions
electrical safety
1-5
laser safety 1-3
scanner (specifications) 7-13
scanning head
assembly conditions
3-2
assembly on PSV-A-T11 A-3
cleaning 3-3
control elements (back view) 3-12
control elements (bottom view) 3-13
control elements (front view) 3-11
cooling 3-2
dimensions 7-11
laser (specifications) 7-9
optics (specifications) 7-12
scanner (specifications) 7-13
specifications 7-9
video camera (specifications) 7-14
SCANNING SYSTEM, connection on the front-
end
3-5
SIGNAL
jack on the junction box
3-6
jacks on the front-end 3-5
specifications 7-2 , 7-9