Polytec PSV-500 - Page 108

iv
signal inputs and outputs
front-end
7-2
junction box 7-8
specifications, technical
calibration interval
7-2
front-end 7-1
PC 7-7
standards applied 7-1
standards applied
declaration of conformity
C-1
specifications 7-1
suitable settings
measurement range
4-2
optimal stand-off distances 4-6
stand-off distance and visibility maximum 4-5
stand-off distances with
CoherenceOptimizer
4-7
tracking filter 4-3
switch off, system 5-1
switch on, system 5-1
SYNC
jack on the front-end
3-4
jack on the junction box 3-6
specifications 7-3 , 7-9
system cabinet
assembly
3-17
specifications 7-14
system components
cooling
3-2
decoder 2-3
signal flow, principle 2-2
summary 2-1
system summary
introduction
2-1
PSV operating modes 2-3
T
tampering with the instruments 3-3
test stand
assembly
A-15
cabling A-17
dimensions A-19
introduction A-14
operate A-17
specifications A-18
tracking filter 4-3
TRIG IN
jack on the front-end
3-4
jack on the junction box 3-6
specifications 7-2 , 7-8
U
unpacking 3-1
use, intended 1-1
users qualification 1-1
V
velocity acquisition, theory B-1
VIB TOP, jack on the front-end 3-5
VIDEO
network connection on the front-end
3-5
network connection on the PC 3-9
video camera, external
assembly
A-24
cabling A-25
control elements (standard lens) A-21
control elements (zoom lens) A-22
introduction A-21
specifications A-25
W
warming-up
laser
3-3
warning label for assembly, on the scanning
head
3-13
warning labels
laser warning labels
1-4
warranty, loss of 3-3
wrong delivery 3-2