A-18
A Optional Accessories
Set speed
You can set the adjustment speed of the telescope drive. To do so, proceed
as follows:
1. Reduce the adjustment speed by turning the potentiometer on the hand
set clockwise (to the right).
Raise the adjustment speed by turning the potentiometer on the hand set
counterclockwise (to the left).
2. Lock the set speed with the lever on the potentiometer.
A.5.4.5 Technical Specifications
Drive Control
Telescope Drive
Mains voltage: 230V/50Hz or 115V /50-60Hz
Protection rating: IP30
Dimensions: 334mm x 62mm x 110mm
Weight: 2.6kg
Protection rating: IP30
Operating temperature: + 5°C…+40°C (41°F…104°F)
Operating time: 20% (in 10min. length)
Velocity stages: stageless
Max. velocity: 28mm/ s
Max. travel: 350mm
Dimensions: refer to
FIGURE
A.12 and
FIGURE
A.13
Weight: 27kg (vertical test stand)
30kg (horizontal test stand)
To Next Page
Loading...
