User’s Manual 31
4. Scanning
The TPC7050 has an integrated CCD scanner that reads all major bar code labels with excellent
performance. The trigger key is located in the middle of the unit. Press this key to activate the
CCD scanner.
4.1 Scan Configuration
When it is necessary to change the default barcode symbology for a different application, use
Scan Configuration to change default symbology, place delimiter characters behind scanned
data, and save the settings.
Run this program from \Programs\Scanner\Scann Configuration.exe which is also accessible
via “Setting\Control Panel\” on the Start menu.
To Next Page
Loading...