User’s Manual 61
8.3.16 PC Connection
You can set up a PC connection to synchronize the device with a desktop PC or other devices.
You can set desktop USB and serial port connections. The following is the procedure required
for changes in PC connection.
Begin with Windows CE.NET 4.2. The TPC7050 basically supports the Internet functions via
USB
. If you set up a partnership with PC during ActiveSync, it provides “USB@PocketPDA”
link items that enable an Internet connection through the cradle:
Figure 8-19 Storage Properties
1. Create a new connection in Go to Start"# Setting"# Network. Choose the direct
connection as connection format. For detailed information, refer to the “Network and
Dial-up Connections” section.
2. Select Go to Start"# Setting"# Control Panel"# PC connection.
3. Select Connection Change icon.
4. Select the connection mode.
5. Connect to a desktop PC.
To connect the
TPC7050 to a desktop PC, you must have Microsoft ActiveSync 3.7 or higher on
your desktop PC.
To Next Page