User’s Manual 53
8.3.4 Dialing
Dialing Properties
1. In the When dialing from list, select the “Location” where you want to change settings.
2. To create a new location, select “New”. Enter the name of the location, and then select
“OK”
3. Enter or edit the area code and local country code as needed.
4. In Dial using, select “Tone dialing” or “Pulse dialing”. Most phone lines are tone.
5. To automatically disable call waiting, select “Disable call waiting by dialing,” select the
appropriate number sequence in the list, or enter a new sequence.
Editing dialing patterns
1. Using the codes listed, revise the dialing patterns as needed.
Notes:
! If you need to use characters other than the ones listed here, use manual dialing.
! Hyphens and spaces in dialing strings are ignored.
! Some modems may not respond to the some characters, even though your device
lets you add them to the dial string.
Figure 8-9 Dialing
To Next Page
Loading...