Power Electronics SD450 Series User Manual

POWER ELECTRONICS SD450 - DEVICENET
TECHNICAL CHARACTERISTICS
13
ENGLISH
2. TECHNICAL CHARACTERISTICS
2.1. General Information
2.1.1. Contents of DeviceNet Optional Board Kit
The DeviceNet optional board kit consists of:
o 1 DeviceNet optional board.
o 1 Connector of 5 pins.
o 3 mounting poles.
o 1 Technical Manual.
o 1 EDS file (see section ‘4.1. EDS File’).
2.1.2. Specifications of DeviceNet Optional Board
o Device Type: AC Drives.
o Explicit Peer to Peer Messaging: Support
o I/O Peer to Peer Messaging: Not available.
o Configuration Consistence Value: Not available.
o Faulted Node Recovery: Support.
o Baud Rate Support: 125, 250, 500 (kbps).
o Master/Scanner (predefined connection): Support.
o I/O Slave Messaging:
 Polling Î Support.
 Bit Strobe (bits activation), Cyclic, Change of State (COS) Î No
available.
o Range of Input Voltages: 11 – 25Vdc.

Power Electronics SD450 Series Specifications

General

Brand	Power Electronics
Model	SD450 Series
Category	DC Drives
Language	English